Name: F436 Square Beveled Structural Hardened Washer Medium Carbon Steel Hot Dip Galvanized
Brand: Ningbo YokeLink Machinery Co., Limited
Price: 0.50 USD
Availability: InStock

Aperçu Produits Fermetures industrielles

F436 Square Beveled Structural Hardened Washer Medium Carbon Steel Hot Dip Galvanized

Détails sur le produit:

Lieu d'origine:	Chine
Nom de marque:	YOKELINK

Conditions de paiement et expédition:

Quantité de commande min:	10000 pièces
Prix:	USD0.5~USD0.95
Détails d'emballage:	Carton et palette
Délai de livraison:	30-45 jours
Conditions de paiement:	T/T
Capacité d'approvisionnement:	50 000 PCs par mois

Contactez

Description de produit détaillée

Matériel:	Acier inoxydable, acier, fer de toutes qualités	Finition:	Plaine / Galvanisé à chaud
Taille:	1/2",3/4",1/2",5/8",1-1/4",7/8"

ASTM F436 Hardened Beveled Washer

Yokelink is a Manufacturer of Beveled Washers, comes in square and circular shapes, in nominal sizes 1/2 through 1 1/2 in., with a beveled 1 to 6 ratio surface for
use with American standard beams and channels. Bevel Washers are designed for leveling and shimming purpose and are commonly used when bolting through the flanges of L-beams. These washers are angled spacing components that are used to correct the uneven or imperfect surfaces. Our Range of Beveled Washers are made from medium carbon steel and then hardened as per ASTM specifications. Usually, Beveled Washers are intended to recompense for lack of parallelism in structural applications involving american standards.

Unlike flat washers which are used for parallel mating surfaces, beveled washers are used for non-parallel surfaces. A beveled washer is a special type of washer that has a sloped side and a flat side. The sloped side can accommodate for different installation angles and allows the two non-parallel faces to be mated and aligned with a stable and tight fit. There are different types of beveled washers that come in both various shapes and sizes and with different surface finishes that can affect the strength of a joint. Therefore, it’s important to pick the right type of beveled washer for your project to ensure a strong, resilient joint.

Beveled washers can come in a variety of materials – from metals to rubbers and thermoplastics. For structural and load-bearing applications, beveled washers are commonly made from metals. Oftentimes, these metal beveled washers will also be surface treated so they can be used outdoors and have a high degree of environmental resistance. Some common metals and coatings used for beveled washers are listed below:

Plain iron
Hot-dipped galvanized steel
304 stainless steel
316 stainless steel
Plain cast-iron washers are highly

Specification:

Coordonnées

Ningbo YokeLink Machinery Co., Limited

Personne à contacter: Mr. Tony

Téléphone: 86-574-86882908

Autres Produits

Hex Washer Head Concrete Screw Hi-Lo Thread Screws Ruspert Tapcon Screw

Matériel:: Acier au carbone, acier inoxydable
Finition:: Zinc, REVÊTEMENT RUSPERT BLEU, Dacromet cranté
Fil: Fil haut-bas
La tête:: Tête de rondelle hexagonale, tête plate

Pour l'ASME B18.3, DIN 915 Série de vis en acier allié avec point de chien, patch Nylok

Matériel: Acier allié, acier inoxydable, laiton, aluminium
Finition: Zingage, noir, patch Nylok
Spécification: DIN913, DIN914, DIN915, DIN916 ASME B18.3

ASME B18.3, DIN 914 Brass Socket Set screws with Cone Point, Nylok patch

Matériel: Acier allié, acier inoxydable, laiton, aluminium
Finition: Zingage, noir, patch Nylok
Spécification: DIN913, DIN914, DIN915, DIN916 ASME B18.3

Vis sans tête à six pans creux en acier inoxydable ASME B18.3, DIN 913 avec pointe plate, patch Nylok

Matériel: Acier allié, acier inoxydable, laiton, aluminium
Finition: Zingage, noir, patch Nylok
Spécification: DIN913, DIN914, DIN915, DIN916 ASME B18.3

Ancres de plafond, boulons pour béton en acier zingué, ancres de sécurité à clou en acier au carbone

Matériel: Acier au carbone
Finition: Placage zinc jaune ou zinc transparent
Taille: M6, M8
Longueur: 40mm, 50mm, 60mm

Stainless Steel undersized square stock DIN6885 Zinc Plating ANSI/ASME B18.25.2M

Matériel: acier au carbone ou acier inoxydable
Finition: Placage de zinc, ordinaire
Spécification: DIN6885 ISO3912 ASME

ISO3912 DIN6885 Machine Rounded Key Stock Stainless Steel / Carbon Steel

Matériel: acier au carbone ou acier inoxydable
Finition: Placage de zinc, ordinaire
Spécification: DIN6885 ISO3912 ASME